Aircon Materials
-
Stainless Steel Bracket
Product:
Stainless Steel Bracket
Types of Bracket:
- Normal L
- Normal L with Punch Thru
- Long L
- Normal 7
- Long 7
- Window
- Window Openning
- Ceiling Suspend
- Base
- Floor Standing
Description:
- The brackets are structural support to the condenser.
- Brackets are welded by qualified welder and installed by qualified installer. Defective bracket may snap off suddenly and your air conditioner hurtling several storeys down your apartments.
- Stainless steel bracket must be used to support the air-conditioning units in one of the standard method stipulated in the Building Control Regulations.
- The way brackets are welded affects its quality and grade; low quality brackets will rust prematurely.
- Brackets that do not meet government regulations are classified as illegal installation which carry sever penalties!
-
UPVC Casing
Product:
UPVC Casing
Types of Casing:
- 6″x4″ Casing
- 4″x4″ Casing
- 4″x3″ Casing
- 4″x2″ Casing
- 2″x1″ Casing
Description:
- Non-conductive: Good insulation, assuring a safe system.
- Smooth surface: Small friction coefficient to ensure the cables go through smoothly
- Fire resistance: Self-extinguishing, do not support combustion.
- Corrosion Resistance: Resistant to acids, bases and salts, assuring a lower maintenance cost and a longer performance life.
- Impact strength: Resistant to compression and impact, suitable to be buried in concrete.
- Easy Installation: Light weight, easy to cut, transport, bent and handle; Connecting by solvent cement and threading joining.
-
Wire Cable
Product:
Cable Wire
Brand:
CABLE PLUS : 100% copper
Country of origin:
Australia
Description:
- The consequences of using sub-standard or under-sized wires could result in potential electrical short circuits or even fire hazards.
- In general, though, the best wiring that you can use for an electrical application is solid copper wire for your home or office. There are a number of different reasons why solid copper wire is the best for all-purpose wiring applications.
- Less breakdowns, Lesser oxidization issues and Safer overloading.
-
UPVC Drainage Pipe
Product:
UPVC Drainage Pipe
Brand:
Aero Pipe
Standard:
- Aero Pipe JIS K-6741 1999 Class AE
Types of Drainage Pipe:
- 13 mm Drainage pipe
- 16 mm Drainage pipe
Description:
- Drainage pipes that are not properly insulated will cause condensation along the drainage pipe. Lack of proper gradient and insufficient diameter size will cause higher risk of drainage pipes choke and result in air conditioner water leakages.
-
Copper Coil
Product:
Copper coil
Brand:
Best Tech Standard Copper Coil
(Available to Best Tech Installation Standard)
Types of Copper Coil:
- 6.35mm ID x 0.71mm SWG
- 9.52mm ID x 0.71mm SWG
- 12.7mm ID x 0.71mm SWG
(** ID – Internal Diameter, **SWG – Standard Wire Gauge)
Description:
- The quality of copper pipes utilized for installation affect its lifespan. Inferior copper pipes will not only be unable to withstand high gas pressure but also results in gas leak, leading to premature failure of your air conditioner.
- Thickness : 22 SWG / 0.71mm
- Pre-insulated pair copper coil is just about the best invention since the air conditioner itself. By eliminating cutting, threading on and sealing of insulation it can reduce your install times by as much as half.
- Best Tech copper coil features a special polyethylene outer film that prevents creasing and helps to protect the insulation when passing the coil through difficult spaces. What’s more, it provides UV resistance. All this makes Best Tech copper coil easier to install and ensures ultra-long-life performance.
- Best Tech copper coil is R410A refrigerant compliant and available in five size combinations. So when you want the job done fast, get Best Tech copper coil.
- Tubes with inferior quality will result in a higher condensation rate and cause leakages. These problems will only surface later and you will end up spending more in the long run.
-
Yamato Japan Insulation
Product:
Thermal Insulation Materials
Brand:
Yamato Japan Insulation
Country of origin:
Japan. (Japan International Standard)
Types of insulation:
- 6.35 mm ID x 10 mm THK
- 9.52 mm ID x 10 mm THK
- 12.7 mm ID x 10 mm THK
(** ID – Internal Diameter , ** THK – Thickness)
Description:
Temperature Range :
- By having a lower temperature, it means that the insulation can resist a lower temperature before condensation appears.
- Temperature Range : -265’C to +120’C
- Thermal Conductivity : K Value = 0.029W/(m.k) @ 0’C
K Value :
- Insulation with high K value increase unnecessary electricity consumption and forces the compressors to work restlessly, thus shortening the lifespan of the compressors. High K value insulation has more possibilities of condensation problems.
- Water Vapour Diffusion Resistance Factor: µ Factor = 25,000
µ Factor :
- The water vapour resistance factor, commonly called µ Factor, is therefore a dimensionless number describing how many times better a material or product is at resisting the passage of water vapour, compared with an equivalent thickness of air.
- Thus HIGH µFACTOR = HIGH RESISTANCE TO WATER VAPOUR TRANSMISSION
- The lower the µ Factor, the thicker the insulation needed to achieve the same result of not having condensation.
- Insulation tubes are used to insulate the copper pipe when running with refrigerant, as the pipes are cooler than the ambient temperature. Without the insulation, the copper pipes will sweat or accumulate condensation of its own.
- Insulation tubes with inferior quality will result in a higher condensation rate and cause water leakages along the piping.These problems will only surface later and you will end-up spending more in the long run.
- 100% Environmental Friendly. more about. Click here..